Tovix
eXtremeRate SPARK Back Paddles Kit with OLED Display & Clicky Trigger Stops & Ergonomic Grips for PS5 Controller BDM-030/040/050/060 – Rubberized Clear & Gray
$52.99
In Stock
eXtremeRate SPARK Back Paddles Kit
Compatible with: PS5
Condition: Brand New
Weight: 150g
Compatible with
- PS5
Condition
- Brand New
INCLUDED
1* SPARK remap board & flex cables set
1* Re-designed back shell
1* K1/K2/K3/K4 back paddles attachment
1* OLED screen lens
2* Trigger stop kit switch buttons (left & right)
1* Prying Tool
1* Screwdriver
30* Screws
4* Stainless steel shafts for back buttons
Note: WITHOUT the controller and any other parts!
1* Re-designed back shell
1* K1/K2/K3/K4 back paddles attachment
1* OLED screen lens
2* Trigger stop kit switch buttons (left & right)
1* Prying Tool
1* Screwdriver
30* Screws
4* Stainless steel shafts for back buttons
Note: WITHOUT the controller and any other parts!
NOTES
1. You will need to disassemble your controller for installation, and high hands-on skills are required. Soldering is optional.
2. The package contains many small electronic components. Please be patient and careful during the installation process to avoid damaging the accessories or improper installation that may cause the Remap Kit not work properly.
3. Soldering optional: we recommend soldering for optimized trigger stop performance and to make the L3 and R3 buttons mappable to the back buttons. Please note that if not soldered, you can only turn off the adaptive mode by the console when in short trip.
4. When installing the back paddles on the BDM-060 model, please replace the original battery bracket with the battery bracket included in the package. For all other installation steps, please follow the same procedure as the BDM-050 model.
2. The package contains many small electronic components. Please be patient and careful during the installation process to avoid damaging the accessories or improper installation that may cause the Remap Kit not work properly.
3. Soldering optional: we recommend soldering for optimized trigger stop performance and to make the L3 and R3 buttons mappable to the back buttons. Please note that if not soldered, you can only turn off the adaptive mode by the console when in short trip.
4. When installing the back paddles on the BDM-060 model, please replace the original battery bracket with the battery bracket included in the package. For all other installation steps, please follow the same procedure as the BDM-050 model.
Feel comfort with Magisso
Himenaeos parturient nam a justo placerat lorem erat pretium a fusce pharetra pretium enim.
Reviews
There are no reviews yet.